Editors’ note: This story was originally published on December 9, 2014, and has been updated with additional information.
Do you know that Wi-Fi and Internet are two different things? That’s true, Wi-Fi is just a wireless method for devices in a local network to connect to one another using a router and share a single Internet connection, if there’s one. Then what is a local network, you ask? And what’s a router for Pete’s sake?
Well, if you’re having a hard time with these basic terms, you’re reading the right post. Here I will (try to) explain them all so that you can have a better understanding of your home network and hopefully a better control of your online life. There’s a lot to explain so this is just the first post of an evolving series.
Advanced and experienced users likely won’t need this, but for the rest, I’d recommend reading the whole thing. So take your time, but in case you want to jump to a quick answer, feel free to search for what you want to know and chances are you will find it within this post.
1. Wired networking
A wired local network is basically a group of devices connected to one another using network cables, more often than not with the help of a router, which brings us to the very first thing you should know about your network.
Router: This is the central device of a home network into which you can plug one end of a network cable. The other end of the cable goes into a networking device that has a network port. If you want to add more network devices to a router, you’ll need more cables and more ports on the router. These ports, both on the router and on the end devices, are called Local Area Network (LAN) ports. They are also known as RJ45 ports. The moment you plug a device into a router, you have yourself a wired network. Networking devices that come with an RJ45 network port are called Ethernet-ready devices. More on this below.
Note: Technically, you can skip the router and connect two computers directly together using one network cable to form a network of two. However, this requires manually configuring the IP addresses, or using a special crossover cable, for the connection to work. You don’t really want to do that.
LAN ports: A home router usually has four LAN ports, meaning that, straight out of the box, it can host a network of up to four wired networking devices. If you want to have a larger network, you will need to resort to a switch (or a hub), which adds more LAN ports to the router. Generally a home router can connect up to about 250 networking devices, and the majority of homes and even small businesses don’t need more than that.
There are currently two main speed standards for LAN ports: Ethernet (also called Fast Ethernet,) which caps at 100 megabits per second (or about 13 megabytes per second), and Gigabit Ethernet, which caps at 1 gigabits per second (or about 150MBps). In other words, it takes about a minute to transfer a CD’s worth of data (around 700MB or about 250 digital songs) over an Ethernet connection. With Gigabit Ethernet, the same job takes just about five seconds. In real life, the average speed of an Ethernet connection is about 8MBps, and of a Gigabit Ethernet connection is somewhere between 45 and 100MBps. The actual speed of a network connection depends on many factors, such as the end devices being used, the quality of the cable and the amount of traffic.
Home networking explained Part 2: Optimizing your Wi-Fi network Part 3: Taking control of your wires Part 4: Wi-Fi vs. Internet Part 5: Home router setup Part 6: Securing your network Part 7: Powerline explained Part 8: Cable modem shopping tips Part 9: How to access your home computer remotely
Rule of thumb: The speed of a single network connection is determined by the slowest speed of any party involved.
For example, in order to have a wired Gigabit Ethernet connection between two computers, both computers, the router they are connected to and the cables used to link them together all need to support Gigabit Ethernet (or a faster standard). If you plug a Gigabit Ethernet device and an regular Ethernet device into a router, the connection between the two will be capped at the speed of Ethernet, which is 100Mbps.
In short, LAN ports on a router allow Ethernet-ready devices to connect to one another and share data.
In order for them to also access the Internet, the router needs to also have a Wide Area Network (WAN) port. On many routers, this port may also be labeled the Internet port.
Switch vs. hub: A hub and a switch both add more LAN ports to an existing network. They help increase the number of Ethernet-ready clients that a network can host. The main difference between hubs and switches is a hub uses one shared channel for all of its ports, while a switch has a dedicated channel for each one. This means the more clients you connect to a hub, the slower the data rate gets for each client, whereas with a switch the speed doesn’t change according to the number of connected clients. For this reason, hubs are much cheaper than switches with the samenumber of ports.
However, hubs are largely obsolete now, since the cost of switches has come down significantly. The price of a switch generally varies based on its standard (regular Ethernet or Gigabit Ethernet, with the latter being more expensive), and the number of ports (the more ports, the higher the price).
You can find a switch with just four or up to 48 ports (or even more). Note that the total of extra wired clients you can add to a network is equal to the switch’s total number of ports minus one. For example, a four-port switch will add another three clients to the network. This is because you need to use one of the ports to connect the switch itself to the network, which, by the way, also uses another port of the existing network. With this in mind, make sure you buy a switch with significantly more ports than the number of clients you intend to add to the network.
Wide-area network (WAN) port: Also known as the Internet port. Generally, a router has just one WAN port. (Some business routers come with dual WAN ports, so one can use two separate Internet services at a time.) On any router, the WAN port will be separated from the LAN ports, and is often distinguished by being a different color. A WAN port is used to connect to an Internet source, such as a broadband modem. The WAN allows the router to connect to the Internet and share that connection with all the Ethernet-ready devices connected to it.
Broadband modem: Often called a DSL modem or cable modem, a broadband modem is a device that bridges the Internet connection from a service provider to a computer or to a router, making the Internet available to consumers. Generally, a modem has one LAN port (to connect to a router’s WAN port, or to an Ethernet-ready device) and one service-related port, such as a telephone port (DSL modems) or a coaxial port (cable modems), that connects to the service line. If you have just a modem, you’ll be able to connect just one Ethernet-ready device, such as a computer, to the Internet. To hook up more than one device to the Internet, you will need a router. Providers tend to offer a combo device that’s a combination of a modem and a router or wireless router, all in one.
Network cables: These are the cables used to connect network devices to a router or a switch. They are also known as Category 5 cables, or CAT5 cables. Currently, most CAT5 cables on the market are actually CAT5e, which are capable of delivering Gigabit Ethernet data speeds. The latest network cabling standard currently in use is CAT6, which is designed to be faster and more reliable than CAT5e. The difference between the two is the wiring inside the cable and at both ends of it. CAT5e and CAT6 cables can be used interchangeably, and in my personal experience their performance is essentially the same. For most home usage, what CAT5e has to offer is more than enough. In fact, you probably won’t notice any difference if you switch to CAT6, but it doesn’t hurt to use CAT6 if you can afford it. Also, network cables are the same, no matter how they shape, round or flat.
Now that we’re clear on wired networks, let’s move on to a wireless network.
2. Wireless networking
A wireless network is very similar to a wired network with one big difference: devices don’t use cables to connect to the router and one another. Instead, they use radio wireless connections called Wi-Fi (Wireless Fidelity), which is a friendly name for the 802.11 networking standards supported by the Institute of Electrical and Electronics Engineers (IEEE). Wireless networking devices don’t need to have ports, just antennas, which sometimes are hidden inside the device itself. In a typical home network, there are generally both wired and wireless devices, and they can all talk to one another. In order to have a Wi-Fi connection, there needs to be an access point and a Wi-Fi client.
Access point: An access point (AP) is a central device that broadcasts a Wi-Fi signal for Wi-Fi clients to connect to. Generally, each wireless network, like those you see popping up on your smartphone’s screen as you walk around a big city, belongs to one access point. You can buy an AP separately and connect it to a router or a switch to add Wi-Fi support to a wired network, but generally, you want to buy a wireless router, which is a regular router (one WAN port, multiple LAN ports and so on) with a built-in access point. Some routers even come with more than one access point (see discussion of dual-band and tri-band routers below).
Wi-Fi client: A Wi-Fi client or WLAN client is a device that can detect the signal broadcast by an access point, connect to it and maintain the connection. All recent laptops, smartphones and tablets on the market come with built-in Wi-Fi capability. Older devices and desktop computers that don’t can be upgraded to that via a USB or PCIe Wi-Fi adapter. Think of a Wi-Fi client as a device that has an invisible network port and an invisible network cable. This metaphorical cable is as long as the range of a Wi-Fi signal broadcast by an access point.
Note: The type of Wi-Fi connection mentioned above is established in the Infrastructure mode, which is the most popular mode in real-life usage. Technically, you can skip an access point and make two Wi-Fi clients connect directly to each other, in the Adhoc mode. However, as with using a crossover network cable, this is rather complicated and inefficient.
Wi-Fi range: This is the radius an access point’s Wi-Fi signal can reach. Typically, a good Wi-Fi network is most viable within about 150 feet from the access point. This distance, however, changes based on the power of the devices involved, the environment and (most importantly) the Wi-Fi standard. The Wi-Fi standard also determines how fast a wireless connection can be and is the reason Wi-Fi gets complicated and confusing, especially when considering the fact there are multiple Wi-Fi frequency bands.
Frequency bands: These bands are the radio frequencies used by the Wi-Fi standards: 2.4GHz and 5GHz. The 2.4GHz and 5Ghz bands are currently the most popular, collectively being used in all existing network devices. Generally, the 5Ghz band delivers faster data rates but a little less range than the 2.4Ghz band. Note that a 60GHz band is also used but only by the 802.11ad standard, which is not yet commercially available.
Depending on the standard, some Wi-Fi devices use either the 2.4GHz or the 5GHz band, while others that use both of these are called dual-band devices.
Wi-Fi standards decide the speed and range of a Wi-Fi network. Generally later standards are backward compatible with earlier ones.
802.11b: This was the first commercialized wireless standard. It offers a top speed of 11Mbps and operates only on the 2.4GHz frequency band. The standard was first available in 1999 and is now totally obsolete; 802.11b clients, however, are still supported by access points of later Wi-Fi standards.
802.11a: Similar to 802.11b in terms of age, 802.11a offers a speed cap of 54Mbps at the expense of much shorter range, and uses the 5GHz band. It’s also now obsolete, though it’s still supported by new access points for backward compatibility.
802.11g: Introduced in 2003, the 802.11g standard marked the first time wireless networking was called Wi-Fi. The standard offers the top speed of 54Mbps but operates on the 2.4GHz band, hence permitting better range than the 802.11a standard. It’s used by many older mobile devices, such as the iPhone 3G and the iPhone 3Gs. This standard is supported by access points of later standards. 802.11g is also becoming obsolete.
802.11n or Wireless-N: Available since 2009, 802.11n has been the most popular Wi-Fi standard, with lots of improvements over the previous ones, such as making the range of the 5GHz band more comparable to that of the 2.4GHz band. The standard operates on both 2.4GHz and 5GHz bands and started a new era of dual-band routers, which accommodate two access points, one for each band. There are two types of dual-band routers: selectable dual-band routers (now defunct) that can operate in one band at a time and true dual-band routers that simultaneously transmits Wi-Fi signals on both bands.
On each band, the Wireless-N standard is available in three setups, depending on the number of spatial streams being used: single-stream (1×1), dual-stream (2×2) and three-stream (3×3), offering cap speeds of 150Mbps, 300Mbps and 450Mbps, respectively. This in turns creates three types of true dual-band routers: N600 (each of the two bands offers a 300Mbps speed cap), N750 (one band has a 300Mbps speed cap while the other caps at 450Mbps) and N900 (each of the two bands allows up to 450Mbps cap speed).
Note: In order to create a Wi-Fi connection, both the access point (router) and the client need to operate on the same band, either 2.4GHz or 5GHz. For example, a 2.4GHz client, such as an iPhone 4, won’t be able to connect to a 5GHz access point. Also, a Wi-Fi connection takes place on just one band at a time. If you have a dual-band capable client (such as the iPhone 6) with a dual-band router, the two will connect on just one band, likely the 5Ghz.
802.11ac: Sometimes referred to as 5G Wi-Fi, this latest Wi-Fi standard operates only on the 5GHz frequency band and currently offers Wi-Fi speeds of up to 2167Mbps (or even faster with latest chip) when used in the quad-stream (4×4) setup. The standard also comes with 3×3, 2×2, 1×1 that cap at 1,300Mbps, 900Mbps and 450Mbps, respectively.
Technically, each spatial steam of the 802.11ac standard is about four times faster than that of the 802.11n (or Wireless-N) standard, and therefore is much better for battery life (since it has to work less to deliver the same amount of data). In real-world testing so far, with the same amount of streams, I’ve found that 802.11ac is about three times the speed of Wireless-N, which is still very good. (Note that the real-world sustained speeds of wireless standards are always much lower than the theoretical speed cap. This is partly because the cap speed is determined in controlled, interference-free environments.) The fastest peak real-world speed of an 802.11ac connection I’ve seen so far is around 90MBps (or 720Mbps), which is close to that of a Gigabit Ethernet wired connection.
On the same 5GHz band, 802.11ac devices are backward-compatible with Wireless-N and 802.11a devices. While 802.11ac is not available on the 2.4GHz band, for compatibility purposes, an 802.11ac router can also serve as a Wireless-N access point. That said, all 802.11ac chips on the market support both 802.11ac and 802.11n Wi-Fi standards.
Wi-Fi designations are the way networking vendors market their Wi-Fi routers in an effort to differentiate between them. Since there are so many Wi-Fi standards and tiers, the designations can be confusing and don’t always accurately indicate the speeds of the routers.
600Mbps 802.11n: As mentioned above, the top commercial speed of 802.11n is 450Mbps. However, in June 2013, Broadcom introduced a new 802.11ac chipset with TurboQAM technology that raises the speed of 802.11n to 600Mbps. And also for this reason, 802.11ac routers now are generally marketed as AC2500 (also known as AC2350 or AC2400,) AC1900, AC1750 or AC1200 and so on. This designation basically means it’s an AC-enabled router that offers a combined wireless speed on both bands equal to the number. For example, an AC1900 router is capable of providing up to 1,300Mbps on the 5GHz band and up to 600Mbps on the 24GHz band. With more and more advanced Wi-Fi chips being developed, 802.11ac has many more designations below.
That said, let me state the rule of thumb one more time: The speed of a single network connection (one pair) is determined by the slowest speed of any of the parties involved. That means if you use an 802.11ac router with an 802.11a client, the connection will cap at 54Mbps. In order to get the top 802.11ac speed, you will need to use a device that’s also 802.11ac-capable. Also right now, the fastest 802.11ac clients on the market have the top speed on paper of 1300Mbps, which is equally to the speed of the AC1900 designation. This means getting any routers of higher designations are unlikely to bring you any benefits in Wi-Fi speeds.
AC3200: In April 2014, Broadcom introduced the 5G XStream Wi-Fi chip that allows for a second built-in 5Ghz band on the three-stream 802.11ac standard, thus ushering in a new type of tri-band router. This means that, unlike a dual-band AC1900 router that has one 2.4Ghz band and one 5Ghz band, a tri-band router — such as the Netgear R8000 or the Asus RT-AC3200 — will have one 2.4Ghz band and two 5Ghz bands, all of which operate at the same time. In other words, a tri-band router, for now, is basically an AC1900 router with an additional 803.11ac access point built in. With two separate 5Ghz bands, both high- and low-end clients can operate in their own band at their respective top speeds without affecting each other. On top of that, two 5Ghz bands also help reduce the stress each places on the band when there are many connected clients fighting for router’s bandwidth.
AC5300: Also known as AC5400, this designation was introduced in 2015. An AC5300 router is a tri-band router (two 5Ghz bands and one 2.4GHz band). Each of the 5Ghz bands have a peak Wi-Fi speed of 2,167Mbps and the 2.4GHz band has a cap of 1,000Mbps.
AC3100: Also known as AC3150, this new designation shares the same Wi-Fi chip as the AC5300 above but in a dual-band setup, the router has one 5Ghz band (2,167Mbps cap) and one 2.4Ghz band (1,000Mbps cap).